Product Description:
*For Hoppe replacement parts please fill out the "HOPPE FUHR or HLS Swing Door Questionnaire" listed under "Technical Information for HOPPE" here.
Hoppe Multipoint Door Kit - Manual Shootbolt Gear for Inactive Door
Catalog #HP-MP-INACT
- About this kit:
- This is a manual shootbolt version of a multipoint door setup.
- This multipoint system has three locking points: the deadbolt (at handle height), the upper shootbolt (into the top jamb), and the lower shootbolt (into the floor).
- This kit includes all hardware components required for one inactive door (that is, the inactive panel of a pair of doors).
- This kit contains the gear only, not the trim (trim includes the handles, escutcheons, and cylinder lock).
- All working gear components are made of solid stainless steel with a satin finish (except strikes, which have a choice of finish).
- Specifications:
- Door height range: 6' 6-3/4" to 6' 10-1/2"
- Handle height: 36"
- Backset: 45 mm (1-3/4")
Note: 60mm (2-3/8") backset also available
- Faceplate width: 16 mm (.63")
- Shootbolt Throw: 25 mm (1")
- For a measured diagram of the gear, click here.
Hardware Components Included in This Kit:
| Name |
Description |
Quantity |
Finish |
| Gear |
Lock case with bottom section of drive rail and lower shootbolt. |
1 |
Satin Stainless Steel |
Top
Extension |
Top section of drive rail and upper shootbolt. |
1 |
Satin Stainless Steel |
| Cover Plate |
Covers faceplate connection to Top Extension. |
1 |
Satin Stainless Steel |
Shootbolt
Strikes |
Strike plates with curved lip. Adjustable. Handed (Left or Right). |
2 |
Polished Brass,
Satin Stainless Steel,
or Oil Rubbed Bronze |
Shootbolt
Supports |
Guides for upper and lower shootbolt. |
2 |
Satin Stainless Steel |
Gear
Mounting Screws |
1-3/8" stainless steel wood screws. |
20 |
Satin Stainless Steel |
| Strike Screws |
Finish compatible 3/4" stainless steel wood screws. |
4 |
Finish will match strikes |
 |
Additional images |
| |
|
|
|
Home 
Multipoint Door Hardware 
)){kind=link}
